Let's be FAIR...said rifle ain't "cheap" and should do nice things by default.
That being said,it's a fucking Sensation. The stock mould(s) are obviously adjustable between receiver/mag lengths,but 400 grit will cure same.
Due receiver geometry,the bedding is spot on and the stock removes easily.
Action fasteners were chased,to allow max engagement and that is a notion I PREACH.
Besides the (2) "usual" swivel studs,there are QD Flush Cups. The Fore End is hollowed/reinforced and rather rigid,while granting a FREE float.
Tang geometry makes sense and is WELL supported.
The receiver and integral recoil lug,follow suit.
The Timney trigger is rather good as issued,but I skinned "Pull" back 1/2 turn. The adjustments are positive and a 5/64" allen your friend.
The balance is fucking SENSATIONAL and there is nothing,that don't not make GOOD sense. Glen hammered this out of The Park.
I'm thinking 2-12x BTR Gen2 Mil/Mil Lit Bitch,to steer the 147's..............