data-csrf="1711643696,689fda5864402b89ab403b44e50adb80" MullerWorks barrels | As Real As It Gets

MullerWorks barrels

dakotagun

Well-known member
Jan 25, 2017
371
22
Shitsville
Has anyone run one?

I snagged an 8 twisted #3 contour for my next 223AI build. I believe the contours he uses are rock creek's so the #3 looked spot-on for what I wanted. It was pretty much an impulse buy, but it looks like everyone speaks highly of them.

Please share your experience if you've been around one.

Thanks.
 

Brett

Well-known member
Oct 19, 2013
199
0
OK
I have a #3 1-8 on one of my 223 AIs. I like it, it gets shot hot and cold, fast and slow, and hits what it's aimed at. I'd get another.
 

Dan In Alaska

Well-known member
Nov 30, 2007
3,366
64
Anchorage
Nope, not Greg. It turns out that I have a Cheesehead connection with one of the guys at the shop. The barrels went to heat treat last week, so they should be in-route, or will be, shortly.
 

Big Stick

Well-known member
Nov 18, 2007
42,650
465
Paradise
Greg is both a hoot and a pleasure...along with being easily amongst THE best of 'plumbers.

Always a treat...................
 

dakotagun

Well-known member
Jan 25, 2017
371
22
Shitsville
I did buy mine from Greg. It showed on friday. It is a 4 groove so I dont know if it is one of Dan's button barrels or cut rifled. It's getting spun up now so it won't be long until I can give a report.
 

dakotagun

Well-known member
Jan 25, 2017
371
22
Shitsville
[img:left]https://imagizer.imageshack.com/v2/640x480q90/923/FE0Ce3.jpg[/img]

Generic form load in my mullerworks tube. 52 amax and H335 in new R/P Brass.

I sure hope the 75 grainers can do as well.
 

dakotagun

Well-known member
Jan 25, 2017
371
22
Shitsville
[img:left]https://imagizer.imageshack.com/v2/640x480q90/924/4AwVKC.jpg[/img]

The rifle.
I'm liking it, though still might go Stealth on it. As of right now I'm running a 223 box with spacer removed & a thinned out 308 (milled)follower. Seems OK so far but I'll be pushing formed loads through it soon to see if it will need some tweaking.