Need a 22 Creed load

[RDW]

Shaen re-chamberd my Fieldcraft to 22 creed and I bought two boxes of loaded rounds from a local shop to get it on paper and for the brass, 88 ELD's.

They suck ass, 3-4" at 100 with and without the suppressor.

88's are paid for but back ordered, I have thousands of 75 Amax's and plenty of BTHP's for now, what powder and what velocity should I expect from the 18" barrel with 75's and 88's?

 

[raghornjp]

I get 3441 with RL 22 out of a 22” barrel

 

[Big Stick]

I'm in '17 Mode,whether 75,88 or 90.

None of mine are that short.

3400fps+ 75's and 3200fps+ 88's for me................

 

[cwh]

Sounds like you should cut your losses and sell it cheap...

 

[Big Stick]

Just a GREAT no bullshit chambering.

LOVE it............

 

[RDW]

I am out of 17 but have plenty of 26, that should work too, right?

The factory loads were jammed .038 in my chamber, seems a tad deep, full of what appears to be 17 at 41.5 grs.

 

[Big Stick]

I shoot less than that with 88's...38.0grs of '17 for me there,moly,Alpha,200's and a Smooch................

 

[Joshf303]

Current load out of a 26” barrel...
Hybrid 1000 42gr
CCI 200
Hornady brass
3475 FPS
80gr Melt Tips

I’d imagine 26 would be GTG.

 

[RDW]

There is five in a half inch or so, RL26 and 75 Amax, that will do until I find 88's and 17.

DELETE
IMG_8908.jpg

 

[cwh]

So I guess selling it cheap is out of the question now?

 

[RDW]

It would be hard to let go of either Fieldcraft, it's a shame they stopped making them.

 

[Dan In Alaska]

I am still kicking myself for not ordering one of the .22-250 FCs from Whittakers, when they closed them out. Dumb....

 

[Big Stick]

There were some deals....................