I know ya'll get tired of postin these, but I want to see some funky shit. You know, jazzy stuff, not OD/blk/grey

That starburst lookin' thing on Steelhead's 257Wby is still my favorite.

Would be handy to have a thread full of McSwirly pics.

I like the yellow one, hope it didn't leave a stain in the snow.

I dig the bumble bee as well, here are a few to add to the mix......Blake

I always kinda dug Brother Bill's 375 stock...

that is my favorite swirly..........Blake

Shitty pics shouldn't load so slow...or rather, any picture that takes that long to load should be a good frame.

Those are poor pics, but I'm too lazy to get off my ass and take a better shot. I will likely, though, get up to pour more baileys and coffee..

don't you have a picture of it on the deck, I might be thinking of another rifle though.......Blake

More shitty pics but here ya go 40% Light gray 40% Olive 20% Black....

Maybe Dave can be talked into snapping a pic of both rifles completed. I gotta say I like mine better now that the scope is hung on her..

that be the pic I was referring to, you done good......Blake

Here's a blue one on my 25-284. Need to get a new picture, hopefully with some dead animals included.

50%blue,25%gray,25%black

Shit Parish,you'll never get a picture of a dead animal with that blue stock, they'll spook to the next county.....grin

The blue is just for show, as it wears Gun-Chaps when I go hunting.

(no, not really)

I dated a girl in highschool whose dad showed me his pride-and-joy deer rifle. A 742 30-06 with chaps, see thru's, and a wideview Redfield. Ouch....

Have always liked that stock. Was gonna order one, but figgered it would scare the deer away.....

Amber scope caps too? Was the case cracked up plasticy type stuff or did it have golden retrievers and mallards in the lining?

4-color...........

What colors are those? That is pretty cool looking. I seem to remember you posting the specs of the gun. Bolt handle looks like it got slipped a little blue pill.

Both are .223AI's


Rem 700 Tactical 20"

Douglas air gauged #7 24"

What are the colors and percentages of the top gun? Looks similar to one I have. I really like mine. Medium Tan/Medium Brown??

Not sure what the color percentage is, it was painted black when I got it. Appears to be about 70tan and 30 purple.

I'd bet that it's tan and dark brown. Their dark brown is kinda purple-ish.

I dig the red/black....

Yeah, that red is killer.

Here's some uneventful Black N Gray (ripped off idea from Stick's black and whites. Sometimes wish I woulda' went with that).

Damn, dude...you've some nice rigs...

Looks like that's all you own.

nope... i just don't got picture of the rest... and a few more on order...grins

Sure is a nice collection.

thanks.

Not sure why I dig this one, but it's just cool. I remember when you got it. What is it again?

Any ideas why it came out all small and shit?

Not the rifle, the pic......

223AI that i had screwed together for the kids.

Better Pic's of Sako 75 40/40/20 OD/light grey/black....

Damn pretty that'un....

I'm thinking about ordering up the exact opposit of this for my M70 7Remmy. I thought mostly white with a little red would be good

that one is 60/40 burgundy/white. got one with red in it coming.. should be a month or so..

Has anyone done 1/3 each red/white/blue even mix, not a fade.

What's the mix on this one???

That would be a nice one for my wife I'm piecing together.

60 Grape 40 white flame. I'm diggin it!

Grape looks like fucking hot pink to me, but momma would be happy I'm sure.

Ruger MKII SS .223 action, bolt face opened for 6.8SPC, #1 Douglas barrel 22", MCM Hunter stock 80% Tan, 20% Black.

That looks sweet.

Page marker

Hi Painless.I really like the colors in that stock that looks like OD, BLACK & LIGHT TAN,would you let me know what the colors are and at what percent there mixed at.Thank's

If anyone has a McSwirly pic of OD,BLACK&TAN I would like to see it.And let me know at what percent you had the colors mixed.

50% OD, 25% Black, 25% Light Tan.

I think that one is 30/30/30 OD, BLACK, TAN.......Blake

Wouldn't that A5 Gap swirl of Humper's be a green/black/tan?

JDS,

That's a nice looking color mix on that stock. Is that a classic?

Yep, it's a Classic.

Thank's for the feedback on the stock colors.Im just about ready to order a A5.

you won't be sorry.......Blake

Went 50% Blk, 25% White, 25% Blue.

Next time I'll go a little brighter.

Am thinking that might be pretty good,upon arrival.

I should make an order,just to give the Trolls something to fret................

It's for the 284win. I just got the dies today. Seating the 140 TTSXs and sending them to the smith soon. Any prefered powder to start with. Got a few to start: IMR4064, R19, R15

Also shooting the 120Vmax.

Not the greatest pic!




Mike

Damn fine looking set up.

just came in, am happier then expected with the way it turned out:

That does look pretty cool.

What pattern is that?

Very nice color mix.

I don't remember the percentages and the stock is half way across the country right now, but the colors are light blue, light grey, and black.

Rem Classic 50% Black, 25% White, 25% Blue.

Anyone got pics of a Desert Camo in a swirly?
How about a winter swirly, like say 50/25/25 in White/Black/Grey?

This one is my all time favorite. I assume the 25% grey is light grey and the blue is dark?

there you go RO...

it's gray black white...

Interesting...I like that color scheme a lot.

I'm guessing you're right. Mine's 50% Dark Blue, 25% Black, 25% Light Grey and they look awfully similar.





Sorry, I don't have any pictures of the rifle without the dink.

Well if you're gonna show yer dink, better its that one...


I may have to copy that receipe jds, as that scheme is right nice.

Mtn Hunter was running a very similiar scheme on a 338 winnie at one time. That does look good.

Very nice JDS. Is that the classic? What barrel contour/length? Thanks.

Chuck, my mtn rifle stock is indeed 50 dark blue, 25 light gray, and 25 black, just like the one jds has. This particular one used to belong to Mtn Hunter and was probably the first swirl I lusted for when I started lurking the Campfire. I happened upon it by chance and had to have it. Matt's right in that he also had a blue 338 Win at the time. Thats a PN#2 tube I have in there now.

Yep, that's a Classic. The barreled action is a 22'' factory LVSF .308 that I had cerakoted by CAS. Like Parish, I also stole the scheme from Mtn Hunter.

I like that one...

I was taking the girls out for a family photo...I still dig this one.

This is my favorite mix.

I missed with this one. I wanted a dark tan and ended up way too light. This one looks better in moonlight...

Not a swirly, but I likey...

I like the red one. Not sure I've seen a red one that I don't like.

But someone snuck in, swapped your FP shroud, drilled holes in your bolt, fucked with your safety, and soldered on a weird handle. Likely wrote something weird on the receiver too. Let me know if you want help kicking their ass when you find the dirty bastard.

This isn't swirly either...





I made this one with Robert Gradous. I left it in Georgia to have flush cups installed and it isn't back yet. When it gets home I will snap a few.

it was doomed from the beginning...I won't cry when it gets abused.

Looks familiar, glad to see I'm not the only one that likes that color combo on a Ruger...

Here's a few:

Uncle Ted,huh?

Nice!

On a side note, where did you get those little stainless stands? Did you make them?

I like the Nuge signature too. Where in WI are you from?

Brother Bill: They're pretty low tech...since I'm a Low Tech Guy in a High Techy World. Just some copper tubing soldered together. They're light, pack up easily and are really stable. A pal of mine made some copies from 1/2" alum. solid round, filed some half round reliefs at the joints and JB Welded 'em together...even easier. With some clear plastic tubing on the legs and where the rifle sits they don't move when you're cleaning and don't ding up the stocks. Heat shrink tubing works great, too.

Matt...I'm not from Wisconsin 'nor anywhere near as civilized as that. I'm a South Dakota guy..buffalos, Mount Rushmore (other side of the state from me), the Badlands, corn, beans, amber waves of grain....that place.

There's a great story about getting Nugent's sig. and his trademark bow and arrow 'stick man' on that rifle and another of mine...this 22BR that I use for fox and coyote hunting.

well.... what's the story?

Very nice on all counts, Al.

Yeah!!!! Let's hear it!!!!!!


George

brown, black, green

50% Woodland Beige, 30% Medium Tan, and 20% Black



60% Woodland Beige, 20% Medium Tan, 20% Black

I believe this is 40% Olive, 30% Tan and 30% Lt Grey. Looks really nice on my stainless 300 RUM. I know the colors are right, not quite sure about the percentages though.

That looks good whatever the percentages are.

Hey Threadkiller,
What style/model and color mix you have on this unit and about what is the going rate?
Nice....

60/40 purple/white Ruger MKII LH inleted for a RH action. i dig it. it's my 270WSM. i really need to work on my pictures. I think they're going for 450'ish? haven't ordered one since they changed their prices in Jan.

Not so girlie lady's stock.....50%turquoise 25%lt gray 25%black.....
YEP.....It's wronghanded....


I tried the 50mm loopy on top but she preferred this one....Just gotta change the crosshairs to duplex....
It's a 308 now...have a 243ai pn barrel on order for her.....


George

That's cool. McMillan's turquoise is a rather pretty shade.

Very nice, Pal ... Jamie should be lovin' it ...

Can you post the color ratios on the red/black one?
That looks good!

70/15/15 Black/Red/Orange

That was pretty good film. The old Holland runs a smack on them.

.243ai

Do the color help your gun hide better from the animals? I just have a wood one, and I think the dang deer see it, they always run. Wait till I am a long range shooter, than they will run, but I will get them anyway. How much do the blue one cost, and do walmart sell these type? Thank you.

yes, yes they do, sure you will, 5,000.00, yes. No problem......Blake

Glad to see Moss is getting some good help here.

we're here to help

Moss, I haven't seen the blue stocks at Walmart lately, I picked this one up at K-mart.

I think Academy's running a special on them.

20" 1/8 223AI.

I dig that color scheme.....Blake

Me too. I got a similar one on order but in OD instead of Forest. 60% OD/40% Black.

Here is a sneak peak at that combination. My favorite for sure.

33/33/33/ olive. Black. Tan.

1% love? grins

I like that one very much!

Thanks TK. Was always crapola at math, 34% OD..Doooh *grin*

fucking nice........Blake

Very nice man!

Are the two black & red stocks the same % mixtures?

Blake, thanks.

LOBO, those are black and orange. As far as the mixture, they're both 50%/50%. This was my 2nd blk/org A5. My original one didn't turn out how I wanted it. I sold it to Brad Arnett and bought my friend Tim's blk/org.

Thanks for the clarification! They both look great, and the mix is a no-brainer to add on my short list of "needed" color combos!!

I picked up a McMillian from the suggestions on another forum for my Remington 700 Youth LH. This is a 50% Forest Green, 50% White in a Remington Compact pattern. This stock is miles better than any of the plastic stocks I have ever seen, and I have to say, even with costing a bit more than the rifle, it really transformed the rifle into something I will use the snot out of. Here are a couple pics:

What is the color mix and style of stock? I like it.

Finally arrived last week. My last two had been camo pattern (Desert and GAP) so I figured I needed another swirly.

Winchester Compact 60% OD, 40% Black. .300 WSM, Talley LW and Leupold 3.5-10x40

You boys are gonna talk me into one of them Bowling Ball Bastards yet................

Classic 60% Black 20% Orange 20% Red...

I'm such a sucker for that black/orange/red mix. Looks great.

I'm still stuck on that 50% blue, 25% grey, 25% black! That stock is gonna be my next purchase. I haven't sprung for a McSwirly yet but i've got several builds coming up that i'm sure I'll use this pattern.

Oh and SuperSeal I appreciate your post with that pic of an awesome display of customs. I show'd the pic to my wife and told her to stop bitching cause shit could get a whole lot worse!...grin

Nice looking handle, I'm still waiting for "the email".....

Waiting on three:

A3 Sporter-Light Tan 40%, Olive 30%, Black 30%

A3 Sporter-Purple 50%, Yellow 50%(LSU Thing)

Rem Varmint-50% Black, 30% White, 20% Grape

Remington Classic 31.7 oz
40% light gray 40% dark gray 20% white

Very nice, I musta' missed the chambering ??

7-08. Overall weight with the 24" barrel is 7lb. 11oz....

30% medium blue, 30% grey, 40% white

i can dig that allot!

I don't have the collection some of you guys have, but it's a start.

That dark blue handle is sweet......

How do you like the A3 sportier stock

Brother Bill- thanks! Turned out different than I visualized, but I like it none the less.

isaac- it's alright. Rides sandbags pretty well. The reach to the trigger from the grip is a little short, but that probably has more to do with me being a 6'6" tall genetic freak than any fault of the stock. The gun (a .204) probably shoots better than I'm capable of, but it might have done the same in the factory stock, but I've never even shot it with the Remington tupperware handle. I FUBARed the order... I was actually looking for an actual A3, but didn't catch my brainfart. Oh well.

I do have an A3 on order right now (I hope it's an A3!).

I believe I read that you can have them push the entire inlet forward, to get a longer length from grip to trigger.