data-csrf="1627354524,b6f70948eaa9d6f12b7bca48e5680d30" R25 243 Feeding Issues | As Real As It Gets

R25 243 Feeding Issues

Brett

Well-known member
Oct 19, 2013
199
0
OK
R25 - BHW 243 Barrel

I'm having feeding issues with my R25 243. The 105 BTHP is deadheading into lower part of the barrel instead of going into the chamber. The round gets wedged between the bottom of the bolt and the barrel, it's not touching the feed ramps. I've tried 4 mags: ASC 10rd, DPMS 4rd, and two 20rd pmags. I can get some pics up if needed.

Has this happened to anyone else?
 

Big Stick

Well-known member
Nov 18, 2007
41,606
245
Paradise
An adjustable gas block,will make you happy in multiple ways.

Sounds like an accelerated cyclic rate to me and I'd be wanting less gas...though you of course can add mass.................
 

Brett

Well-known member
Oct 19, 2013
199
0
OK
There is a Slash buffer/spring inside. I’ll tweak the gas block. I’m also running a can...

I’ll tweak it and report back.

Thanks