There is really only five screws and a random to fuck up the unwaryYou RUTHLESS Fucks take Peer Pressure to new levels!
To their GREAT credit,Teeker do Cheater rails VERY right. (6) fasteners and (2) steel pins to affix same,along with Goop. Simply exceptional,both in theory and Application.
That being said,it's tough to waltz past 40 MoMo's of free inclination. Mountain Tactical,do through the Big Nugget Recoil Stop in the Cheater Gopher Hole and that too is very smart.
As Milk Jugs go,a Cheater is better than most,I like that The Sling Stud Blow Holes are filled with blanks,on the exterior. I'll only use the front.
in this Day & Age,Threads are smart bidness too,though Muzzle Danglies ain't my game. It's gooped and ViceGrip'd on.(grin)
No thang to back trigger pull weight out and dead head it on the fire control's fastener. Nice that the cheater is gooped there too,but most do Today.
You boys might be onto sumptin',with a 20" Stainless Cheater in 223...................(grin)
I’ve kinda been keeping my eyes open for one but haven’t found one yet75 ELD's smoochin' at 2.475" and I've spec'd more than a few customs,to replicate same.
I'd never given thought to the mag.(grin)
If only because extrapolations,tend to connect dots.
I reckon if a guy cracked open some Lapooey Virgins,spilt some Lever',sprinkled with 400's and stuffed 75 ELD's in same,there might could be some traction..............(grin)
I’ve lost count of how many “Custom Killers” have come and gone...still my favorite outta the box medium weight rig.Been CTRing from the get-go…. I’ve had a few of them all, except the .223. I could dig that rig, especially with a muffler.
I could get behind a stainless 20” CTR in .22 or 6mm Creed for sure, and would order/buy one on sight.
Dremel and a couple PBRs make the cheek piece rather functional too.
View attachment 592
Can’t think of much better. Throw a can on it, hand him a case of shells and keep the knives sharp...I'm thinking about a CTR 6.5 creed. Probably be a good mid range gun that the kiddo could shoot without a lot of recoil. My fieldcraft bucks a bit too much for him
Is that a Victor Co cheek rest?Been CTRing from the get-go…. I’ve had a few of them all, except the .223. I could dig that rig, especially with a muffler.
I could get behind a stainless 20” CTR in .22 or 6mm Creed for sure, and would order/buy one on sight.
Dremel and a couple PBRs make the cheek piece rather functional too.
View attachment 592
Thinking same for mine. Got the x47 Montana coming back home this week…but the CTR would be much better suited for high volume fun.I'm thinking about a CTR 6.5 creed. Probably be a good mid range gun that the kiddo could shoot without a lot of recoil. My fieldcraft bucks a bit too much for him
Nice, what caliberSportsman’s finally came through and I picked up the Superlite today.
Athlon and Sportsmatch worked out great for me, cheek weld right where I like it.
Id like to be a touch lighter on the trigger, might have to shorten the adjustment screw a tad.
Handling/ergos spot on for me, which has been the norm for Tikka and Kimber.
If it shoots like my past Tikkas, I can see this one seeing a lot of carry time.
Tempted to toss a 6x MQ, since this one has meat and taters written all over it, but we’ll see.