data-csrf="1714221605,6168be9dc9074e7a74d4b5b5ec192a2e"
I might be game. Whatcha got in .224? I might have an extra or so 700 stainless in 243 -- sporter contour.Big Stick said:Anyone got anything they don't shoot much anymore and thinkin' they wanna trade for sumptin' new?
Money makes everything dirty,but Horse Tradin' is a hoot..................
Was sorta thinkin' about trippin' my Dick Rifle (S/S 700,#4 fluted Krieger 1-7.7" 22-250AI at 23",McMillan Classic,HS DBM,yada,yada)...but shot it yesterday and remembered.(grin)shortactionsmoke said:I might be game. Whatcha got in .224? I might have an extra or so 700 stainless in 243 -- sporter contour.Big Stick said:Anyone got anything they don't shoot much anymore and thinkin' they wanna trade for sumptin' new?
Money makes everything dirty,but Horse Tradin' is a hoot..................
Got a mint savage 110,Tasso base and see thru rings. 3-9 Tasco scopeBig Stick said:Anyone got anything they don't shoot much anymore and thinkin' they wanna trade for sumptin' new?
Money makes everything dirty,but Horse Tradin' is a hoot..................
Have had 'em long and short,as well as in .473" and .532".Teal said:Stick - what's your take on the Rem factory DBM?
I do have a #5 contour Krieger .308 diameter, uncut blank here. SS 1~10 twist.
Might be interested in trading for cash or something else. It's just been sitting in the box since about 2003 when I bought it.
What's an Annie 54 repeater ?Big Stick said:Shoots soft,drive tacks,lotsa COAL latitude and ain't a horrid way to fly.
Hoping someone has an Annie 54 Repeater they're tired of............(grin)
The 7-08 is the one to have,as it's twisted right,to do nice thangs.raghornjp said:Ran across a like new R25 in 7-08 a couple days ago for $900.00 and thought of 100 different reasons I needed it but so far common sense has prevailed..............grin
Fucking near tempted to do one with a Dremel,just for giggles. Hog out the receiver bottom and install this prick,then Rock on.eddybo said:If I had a stock that has been repeaterized I could figure out how to cut my annie to repeat, I think...at a loss with what I have on hand, but only put a few minutes thought into it.
Anybody interested in a tang safety 77 in a nice mcmillan. I picked it up over on the hide on a whim and never got around to retubing as initially planned. Never fired by me as I do not shoot the donors.
Got a 6x284 built on a lawton in a HS long old benchmark fluted barrel on it but it slings the snot out of 105 lapuas
I got a bunch of crap I would swap off, I do not really like to sell stuff.
I'll save it in the dick with good shit folder...Big Stick said:Norm,
I'm wheels up in a bit,headed to work.
I'll be the Day Bitch and heading up 1st Flight. Found my phone,got your message,but cain't retrieve a call back number.
Mebbe shout my way come Wednesday or sumptin' and I'll PM you an Email,should that help you.............
My vote is to get cold and lock the mud up...Big Stick said:Parole is always nice.
Weather is better this Tour,than last. Mid-40's yesterday and gorgeous.................
You need counseling....Tanner said:I've got a SS 700 7mm Rem Mag bedded into a Mickey KS that shoots like fire that I'd consider trading towards something shorter and lighter...
Tanner
Yeah, it took a year or so for the replacement to arrive, but I've had my current .223 Montana for a while now. It wears a 3.5-10x in Talley LWs. I haven't gotten around to bedding it yet, but I'll do it the same day I bed my .280AI Montana....whenever the hell that is. As you can see, I'm in a real rush to get it done.raghornjp said:You ever get another one up and running ?
I was talking about the wrong border, or the wrong direction anyway... I'll shut up now!Oatmealsavage82 said:Has to go to FFL then $250 and a month or two later and it's in my mitts.
Want your montucky back? Paints been removed and it's a little worse for wear since we traded.Tanner said:I've got a SS 700 7mm Rem Mag bedded into a Mickey KS that shoots like fire that I'd consider trading towards something shorter and lighter...
Tanner
So, how would you go about moving the shoulder back the requisite amount while still maintaining the false shoulder? FL bushing die w/busing removed for the set back then re-installed for the false shoulder, or just make the shoulder the shoulder outta the gate?Big Stick said:I'd prefer to start with a 7mm hull in a 270 anyhow...so as to bank a false shoulder outta da gate.................
I got all that headspace on the partial sized neck business but, the 7's shoulder is further forward to begin with as a virgin hull, the idea being that you can't chamber a 7 in a 270 much like the 270Win/280Rem scenario.Big Stick said:Screw your sizing die down until it touches the shellholder,then come offa it 1.5 spins. Lube Virgins and size the 1st one,via that setting and it won't chamber...which is what you WANT.
Adjust the sizer in small increments towards the 'holder,until the Virgin chambers with the resistance you like,then follow suit with the rest of the batch.
If you can't FEEL resistance,you've done fucked up headspace.
Hint.................
Anything you're looking for in particular? Or are you hoping to keep it local?Big Stick said:Have a Weaver T-16 I could be swindled outta.
Same goes the CZ 452 American Heavy Barrel Hummer and both stocks(slammed it into a Boyd's Tacticool),wearing DIP 25MOA rail,PRW's and a Reupold straight 12x with turrets....................
I'd take it all, aint that interested in the scope...Big Stick said:I'm easy.
Whattya got?
You want the bare rifle or all the shit? Only makes sense to want all the shit,that way I don't have to throw anything offa cliff....................(grin)
Flunged you a PM.Lineman said:I'd take it all, aint that interested in the scope...Big Stick said:I'm easy.
Whattya got?
You want the bare rifle or all the shit? Only makes sense to want all the shit,that way I don't have to throw anything offa cliff....................(grin)
Probably ain't got much you'd like, got a brand new adl .243, and a 77/17 hummer that i got for the wife. Gonna send em down the road soon if she don't show any more interest. Both blued though, and I know that aint your thing. I'll see what else i got when i get home.
Still have any of the 6x42s left? Looking for one.Big Stick said:Thinking I need another S/A 700 .473" or two.
Found a coupla more 6x42's and 3.5-10x AO's today,that are up for Trinkets..............
Missed this one...Big Stick said:Who's got a long action .473" Montucky that "don't shoot"?
I need one...............
long action ... ?BrianW said:Missed this one...Big Stick said:Who's got a long action .473" Montucky that "don't shoot"?
I need one...............
I've got a Kimber Montana in 257 Roberts, I'd swap for something in 223(AI?) that's lightweight and ready to hunt our local.
I already have a Montana in .308 .Big Stick said:Shoulda rolled with the ruse..................(grin)
I'll trade you a fitbit for it....overkill said:I have a 3.5-10 with an M1 elevation only and a set of low talleys I will trade.
How much cash you thinking ?Dude270 said:I've got a rem 700 that's been bushed by Greg wearing a pac nor stainless SM rem sporter contour finished at 22" 3 groove 8 twist 223 AI. Mag box is modded for Amax's. Barreled action mag box and trigger only. Have some fired brass I could throw in too.
I'd trade for cash or partial trades for leupold 3-9 or 3.5-10's with TTs or M1 up turrets
What do you need?cwh said:I'll be keeping my 6X's, but I have a 3.5-10 with M1's I could be talked out of...
I'll give you a dollar more than Dan will.cwh said:Cash, 223 montanas, SS K-hornets...
That's the scope we swapped onto your AR that was acting wonky. (so if it has ring marks, its your fault... grin).
Why are they clearing out the 75 A-max or any amax in general? They're not getting rid of them are they?30338 said:MidwayUSA free freight on $150 or over orders. Just restocked on clearance 75 amaxs for $86 per 600. Thought that was decent. 162s are pretty cheap right now too.
Got em coming .. heh hehBig Stick said:WHY are you lingering?..................
That'd be the slickest of moves....where I was headed if I coulda got it swung....WhiskeyTango said:Tempting.....
Fugg it, I'm ordering this in the morning. http://bugholes.com/index.php?route=product/product&path=88_89_92&product_id=162
Drag that sucker out! I'll be in touch tomorrow...cwh said:You should probably take a look at my 338 ultra while you are in town.
Off the market...Tanner said:Got a sorta' beat up 300 WSM Montucky that shoots 155s great if anybody has a .338 or 375 laying around.... 3-9x40 leupy with an M1 atop it...
Tighten the right side last so as to account for spin-drift.Big Stick said:Get some windage adjustable mounts on that bitch,to counteract topography incline and you will be good to go...............
I've used the MK 4 reticle spotters quite a bit... It's one of the few things Leupy did right...Big Stick said:Thinkin' I'm gonna trip my Zeiss 15-45x 65mm Spotter and take the kick to the nuts,with a Reupold FFP Mil Reticle...............
I'll give you what you've got into it, minus what you've gotten out of it... grin.Big Stick said:Thinkin' I'm gonna trip my Zeiss 15-45x 65mm Spotter and take the kick to the nuts,with a Reupold FFP Mil Reticle...............
.280 AIScorpion said:Whatcha got?Lineman said:Anyone have an 84M and would rather have an L?
What ya got to trade?Matt said:Who has a Leupie 3.5-10 or 4.5-14 non a/o with M1's on it that they are looking to get rid of?
You're right, that was shitty.....carry on.Big Stick said:Hey now...don't go fucking up my Reupold Dump,onto the unsuspecting!
That'd be rude...................(grin)
You'll be fine.WhiskeyTango said:I hope 9.25 isn't a problem. Just ordered a thousand.
It's off the market.Rod Builder said:Whatcha want for that 243?
Does the "Trade Times" make it up your way??16Bore said:If he's a VA boy, tell him he needs a 7 too
$650.00 used Glocks and $1000.00 used "custom" AR's aren't your thing?16Bore said:Haven't seen it. Va Gun Trader is a bad as a local yocal gun show.
At one time that one went a few miles with me. I should have made a kydex neck sheath for it. I think Gene called it the SLK for Slick Little Knife.cwh said:Somebody must need this little fucker. I thought that somebody was me, but I've never really carried it.
![]()
![]()
One for scale...
![]()
There ain't too much,that I don't not got.cwh said:Whatcha got?
I should have an extry RAR 223 Milk Jug kicking around.Lineman said:Anyone have an extra Ruger American stock (Compact .223) they aint going to use? I'd prefer the full size to a Compact.
Big Stick said:Hope it all pans out...............
Yea I've been thinking about one. Just didn't want to dump that much cash into this rifle. May end up going that route though.Big Stick said:A Chassis will nip all,including COAL hurdles.
Food for thinkin' 'bout.................
Yea I've been thinking same.Big Stick said:It might sting for a second...but you'll never regret it. Much to be said for never fretting POA/POI shift due to a stock and the inherent ability to sling mags that'll grant COAL reserves.
I called MDT this morning as I've been having an issue with AM 5 rounders and MDT 10 rounders not sitting high enough and not feeding good in general. They are sending me a new latch with a heavier spring and more length to hold it higher.Rolltide said:It's easy. The only thing the disclaimer is talking about is that you have to bolt the barreled action into the chassis and then put the mag release in. A lot of chassis have the mag release already mounted, but they can't do that with the American because the action screw is directly underneath the mag release.
On the mags, I have MDT mags that work great with both my .223 Stainless and my Creed Predator. In addition to the MDTs, Accurate Mags will work although mine are inconsistent on staying high enough to feed. I think there may be a few other mags that will work but the MDT mags are my go to right now for both of mine.
I'm sure no one really gives a fuck, but to my surprise, still shooting tiny groups when using a bipod. Did shift POI about 1.5 inches up and left though.Lineman said:Loaded up 50 more of these to see how much this stock screws with the accuracy from different holds/positions.
If it appears to be fairly stable, I think I'll keep it, camo the fucker and have a real handy rifle for spring turkey season.
Lineman said:Anyone have an extra Ruger American stock (Compact .223) they aint going to use? I'd prefer the full size to a Compact.
Lineman said:https://www.24hourcampfire.com/ubbthreads/ubbthreads.php/ubb/showflat/Number/12138220/gonew/1/ruger-american-rifle-stock#UNREAD
Nice...16Bore said:Roger that. I picked up a 243, tripped the scope and have a whopping $150 in it. Going all out with a M8 6x42, LW's, and Blue Box 100's.
Stay the hell outta my way....
It's a .223.pavementends said:what cal. is your rifle and what are you looking for?
Pavementends
Can't think of anything right off hand, just waiting for something to catch my eye.Big Stick said:Spit some wants,as undoubtedly...sucha parcel will move easily in these parts................
Some light to midweight rifle in something not too big would probably interest me...I'm fresh out of .308s at the moment.Big Stick said:Spit some wants,as undoubtedly...sucha parcel will move easily in these parts................
Will separate....if that makes a difference for anyone.Lineman said:![]()
Anybody looking for one of these?
Not very....been a baaadddd week for Leupold here.Big Stick said:How far will a Reupold 30mm side-focus M1 Bitch get me?......................(grin)
Brett said:Upgraded Remington R25
I've decided that I'd rather build/buy a chunk rifle play toy (broken record right?). If the rifle doesn't move, I'll shoot it as is. The barrel is unfired. If you've been around this site long at all, then you'll notice the ARAIG influence in the components. Scope/Rings are not included unless you really-really-really want them and we can work something out. Also, the muzzle device will stay with me.
PM with questions and offers, also posted in classifieds.
-Thanks
$1275 Shipped, FFL must accept from a private individual
Trades:
-700 SA +cash
-the right chunk 700 SA 6, 6.5, 7 something...
Specs:
-(New/Unfired) BHW 243 Win, 1-8", 20", 5/8-24, standard contour
-CMC 3.5lb Single Stage Trigger
-Xtra Heavy Buffer and Spring from HeavyBuffers.com
-Seekins Adjustable Gas Block
-Hogue Grip
-Extended Charge Handle Latch
Components Also Included:
-100 Unfired 308 Lapua Cases that have been necked down to the 243 BHW chamber and primed with 250s
-500 105gr BTHPs
-Hornady FL Die Set
-RCBS FL Base Die Set
-Barrel Nut Wrench (Not Pictured)
-One ASC 10rd Mag
-One DPMS 4rd Mag
-One Magpul 20rd Mag
-The factory barrel if you want it; 1-10"
Minuses:
-The camo dip-job is knicked up and looks like someone touched it up with a sharpie
-The FF tube sling stud is at the at the 7 o'clock position from inhaling the new barrel
![]()
Need to check if it's an ADL, but yes have a youth 700 tupperware that needs to be replaced with a full size stock. Will try and remember to check when I get home next week.Vek said:Anyone have a Remington youth Tupperware ADL stock kicking around?
You might as well dangle them pics here and set some bait.J-Hon said:Oh yah, also got a Winchester 52D in a refinished factory stock sitting around doing nothing. Looking to flip it into a CZ or Anschutz....
Not yet...a new retaining wall, along with the concrete and new decking is cutting into my fun budget a bit...Certifiable said:Tide you get that vudoo order placed yet?
Jesus, figured that one was gone long ago.16Bore said:
I love me a V16 from time to time.Big Stick said:Why?...............Lineman said:Looking for a Weaver V16.
What are you looking for?Lineman said:No Kimbers for sale/trade after Barrett fever??
84M or 8400, didn’t care for my 84L...cwh said:What are you looking for?Lineman said:No Kimbers for sale/trade after Barrett fever??
Not going that far, but not far off either...16Bore said:Been there, done that....22 LR, 223, and a dandy hunting rifle of sorts does it. I was thinking you had a pretty stellar 243 as your go to?
I have not, never even heard of that site. I appreciate the heads up.Rolltide said:That Hornet should sell quickly. Have you listed it on theeclassifieds.com? I've had a lot of success selling on there.
SPFLineman said:Been posted before, but...
$675 for everything here:
![]()
One of the mags doesn't feed correctly, replacement is still in the packaging. Meant to toss it but it got mixed back in.
Likely needs a bedding tweak, some POI issues when using a bipod.
Lineman,Lineman said:Looking for a couple 10x MQs and one 3-9 MQ.
Have multiple 6x's, one SFP 3.5-15 MQ and a 10x MD to trade. Have non-SWFA as well if anyone is looking for 1" tubes, cash too if you don't want to trade.
Shot you a PM, but it’s acting funny. Maybe shoot me an email if PM doesn’t work. dclark_at_utexas.eduLineman said:I’ve probably got a 6x MQ I’d let go, if you’d rather fly that way.
Shoot a PM if interested.
Same goes for Lineman.Lineman said:FWIW, just had a flawless transaction with Brett.
Issue free and would not hesitate to do business again.